Send Sample
In order to assist you with providing an appropriate amount of sample, please refer to the table below. If the test you require does not appear on this list, or you do not have the sample volume required, please feel free to give us a call on (08) 9225 5810 or email admin@microanalysis.com.au.
| Analysis | Minimum sample size |
| 7 day Corrosive to Metals | 500g |
| Angle of Repose | 2000g** |
| Ash content | 100g |
| Carbon analysis | 50g |
| Carbonate analysis | 50g |
| Chloride titration (Mohrs) | 100mL* |
| Corrosive to metals | 150g |
| Density (Absolute – He pycno.) | 100g** |
| Density (Bulk – ASTM2854-’89) | 500g** |
| Density (Tap/tamped) | 500g** |
| Differential thermal analysis | 100g |
| Dissolution test – Environmental | 50g |
| Dissolution test – Gambles solution | 50g |
| Dissolution test – Stomach Acid (US EPA) | 50g |
| Flammability | 1500g** |
| ICP-OES | 50mL |
| Loss on ignition (1000C) | 50g |
| Moisture Content | 100g |
| Particle counting (Hiac/Royco) | 250mL* |
| Particle sizing – laser diffraction | 50g/100mL* |
| Particle sizing – laser diffraction in solvent | 50g/100mL* |
| Particle sizing – Sedigraph | 50g/100mL* |
| pH measurement | 10g/50mL |
| RFS | 250g |
| Self-heating | 3000g** |
| SEM Microanalysis | 5g |
| SEM Photography | 5g |
| Sieving – dry | 25g |
| Sieving – wet | 25g |
| Sieving – Wet (10 Sizes) | 50g |
| Specific gravity (SG) of a slurry | 200mL |
| Surface area – 3 point BET | 10g |
| TIC/TOC | 50g |
| TML | 2000g** |
| Total suspended solids (TSS) | 500mL* |
| X-ray diffraction (qualitative) | 10g |
| X-ray diffraction (quantitative) | 10g |
| X-ray diffraction (semi-quantitative) | 10g |
| X-ray fluorescence | 20g |
| *Volume required will vary with concentration | |
| **Mass required will vary with density | |
| NOTE: Sample volumes are the minimum for an ideal analysis. If insufficient sample is available then we may be able to modify the procedure to complete the analysis | |
